University of Maryland Physics Education Research Group


UMd PERG Page

Alternative Homework Assignment: Electrical Safety

PERG Info | PERG materials | PERG HOMEPAGE | PER on the web | Resources on the web

Alternative Homework Assignment: Electrical Safety

Dan is the proud owner of a pet love bird named Felix. One day while Dan was cleaning Felix's cage, Felix flew out an open window. Looking out the window, Dan saw Felix perched on a high tension power line just outside Dan's window. In this problem, we will investigate how Felix is able to rest on such a wire without injury, Dan's ill fated attempt to retrieve Felix, and perhaps gain some insight into why high tension power cables are generally far away from high rise apartment buildings.

  1. Before we can consider the effects it might have, we must consider the high tension power line itself. Such wires are frequently constructed by twisting copper wires together into a large flexible bundle. Consider such a cable with a diameter of 4 cm. If this cable is 10 km long, what is its resistance?
  2. High tension power lines connect the transformers at a power plant to the transformers at a substation where the voltage is stepped down for household use. The impedance of the transformer at the substation will vary greatly depending on the energy requirement it must meet. Suppose that the transformer connected to the line where Felix is perched has an impedance of 100,000 Ohms. If the root means squared voltage across the transformer is to be 25,000 V, what must the root means squared voltage across the transformer and the power line be?
  3. What is the root mean squared current though the power line?
  4. Estimate the distance between Felix's feet.
  5. What is the voltage drop in the power line across this distance?
  6. If Felix's legs have a resistance per centimeter of about 1 MOhm, estimate the resistance from foot to foot.
  7. From the above information, calculate the current through Felix's legs.
  8. Assume that birds' sensitivity to electricity is similar to humans and determine if Felix can feel the current through his legs.

Part 2: Noticing Felix on the power cable, Dan decided to retrieve him. In order to do this, Dan stepped out onto the window sill to call to Felix. Once on the sill Dan began to slip and in order to avoid plunging to his death he jumped to cable where he found himself hanging without hope of returning to the window sill. Felix, disturbed by the commotion flew back into the apartment.

  1. Estimate the distance between Dan's hands, and calculate the voltage drop in the cable across this distance.
  2. The resistance from hand to hand on a person is about 400 Ohms. What is the strength of the current through Dan?
  3. According to the table, is this current dangerous?

Part 3: Unable to return to the window, and too high in the air to jump to the ground, Dan made his way to the nearest support tower. This tower was unfortunately for Dan made of metal and grounded. As Dan reached for the tower with his foot, he created a link between the grounded tower and the high voltage cable. Current surged through this low resistance path to ground, killing our unfortunate hero.

  1. Assuming that Dan's apartment is near the substation, what was the root mean squared voltage across Dan's body?
  2. If the resistance from Dan's hand to his foot is about 500 Ohms, what was the current through his body?
  3. This value should be off the chart for listed effects. To get an idea for what type of effect it might have, calculate the power dissipated though Dan.

Part 4: From the above story, it should be clear why in the real world, great care is taken to keep high voltage power lines out of reach. As a final exercise we will examine how Dan might have forced Felix off his perch while sparing his own life.

  1. While the best solution may have been to leave the window open and put some of Felix's favorite food on the sill, let's examine what would have happened if Dan had reached out with a long plastic rod. Plastics generally have resistivities on the order of 1012 Ohm m. If Dan had a pole of such material with a diameter of 3 cm, and a length of 3m, what would be the resistance though that pole?
  2. How much current would flow across this pole if a 25,000 V potential difference were placed across its ends? Would this be safe?
  3. Is it possible for this pole to act as a capacitor and transmit the current in this fashion?


These problem written and collected by K. Vick, E. Redish, and P. Cooney. These problems may be freely used in classrooms. They may be copied and cited in published work if the Activity-Based Physics (ABP) Alternative Homework Assignments (AHA's) Problem sight is mentioned and the URL given.

Work supported in part by NSF grant DUE-9455561

To contribute problems to this site, send them to redish@quark.umd.edu.

Go back to the AHA page

Information about PERG Resource materials from PERG PERG Homepage PER elsewhere on the web Resource materials for teachers

Maintained by University of Maryland PERG
Comments and questions may be directed to E. F. Redish
Last modified June 25, 2002